Archivi categoria: News

CS-Electronic Competition Power Discharger 200W

CS-Electronic from Germany have introduced their new 200W Competition Power Discharger device for the use in combination with the recently announced Space X3-Competition Duo charger. The discharger allows for discharge currents of up to 16A while offering balance discharging and single cell voltage monitoring, ensuring safe and secure discharging using high currents. The results will help to identify weak packs but the discharger also allows to bring fully charged packs to storage voltage a lot faster than just using the charger’s discharge function.

Source: CS-Eletronic [cs-shop.de]

The post CS-Electronic Competition Power Discharger 200W appeared first on Red RC.


Fonte: RED RC.

Neil Cragg sweeps Schumacher Indoor Masters Rd3

Round 3 of the Schumacher Indoor Off Road Masters at Worksop was held this past weekend. The race was once again a full entry with many great drivers in attendance. When the dust had settled it was Team Associated’s Neil Cragg with the win in 2WD Buggy from Schumacher driver, Ben Smith on the runner-up spot. The top 3 result was completed by Team Associated’s Tommy Hall.

Over in 4WD Buggy it was again Neil Cragg with the overall from Xray’s James Helliwell in 2nd and Schumacher’s Allan O Brien in 3rd.

The 2WD Stadium Truck class saw Lee Talbot walking away with the silverware chocolate from Abe Lyons in 2nd and Alex Callan in 3rd.

Last but not least and in the Vintage class it was Rob Fox with the win from Steve Pierce in 2nd and Jim Drennon in 3rd. The next round is Sunday 5th January 2020.

Source: Schumacher [racing-cars.com]

The post Neil Cragg sweeps Schumacher Indoor Masters Rd3 appeared first on Red RC.


Fonte: RED RC.

Tamiya TRF420 aluminium front spool cup set

Tamiya have announced the soon release of the TRF420 aluminium front spool cup set. Originally designed for the TRF420 the set is also of use for TRF419 and TA07 where the lightweight aluminium outdrives reduce rotational masses for better acceleration. The outdrives come with a special surface treatment for wear while the included driveshaft cups further improve the durability of all parts involved, such as the driveshaft pins.

Source: Tamiya [tamiya.com]

The post Tamiya TRF420 aluminium front spool cup set appeared first on Red RC.


Fonte: RED RC.

Sweep Racing F21 low-profile formula tyres

Sweep Racing have announced the soon release of their all-new F21 low-profile formula tyres. Making use of the new-for-2021 design of the real Formula 1 rims and tyres, Sweep Racing’s pre-mounted tyres offer 27mm width for the front and 40mm width for the rear, making the 1/10th scale cars look a lot more like the real thing. The new low-profile wheels also have a wide offset in order to generate more steering and increased stability. Included with each pair of tyres come stickers in Red, Yellow or White and the tyres will become available in soft, medium and hard compound.

Source: Sweep Racing [sweepracing.com]

The post Sweep Racing F21 low-profile formula tyres appeared first on Red RC.


Fonte: RED RC.

Stefan Lutka sweeps Pribeta club race

The Pribeta club in Slovakia recently held their club race and it was Stefan Lutka who took a double win in both the 2WD and 4WD Buggy classes. In 2WD, where Stefan started from P2 on the grid, he took the win following some hard fights against 2nd placed Aron Karika as Varga Karoly completed the top 3 results. Over in 4WD Buggy the podium would be completed by Josef Petrik in 2nd and Varga Karoly in 3rd.

Source: Xray [teamxray.com]

The post Stefan Lutka sweeps Pribeta club race appeared first on Red RC.


Fonte: RED RC.

Muchmore Fleta ZX V2 ER Spec titanium rotor motor

Muchmore have introduced their new Fleta ZX V2 ER Spec stock class brushless motor that comes including the MR-FZR27TIX 12.3x5x24.2mm titanium rotor. Available as 17.5T and 21.5T variant, the motor will produce increased torque which comes in handy especially for blink buggy classes and when running in high-bite traction conditions. Besides the rotor, the motor makes use of the same features as the standard ER Spec series, meaning it utilises the highly machined Flow-Max 2 aluminium can, a high-power stator, heavy-duty solder tabs and an adjustable timing end plate.

Source: Muchmore [muchmoreracing.net]

The post Muchmore Fleta ZX V2 ER Spec titanium rotor motor appeared first on Red RC.


Fonte: RED RC.

Sousa & Maiorana win at Drumstick race

The Drumstick race was held at the RC Clubhouse track in Warren, Michigan last weekend. The race saw around 130 entries which is a pretty standard for this race every year. In the 4WD Buggy A-main 2nd place qualifier, Xray’s Mark Sousa made a pass for the lead on lap one but then got together with the 2nd place driver and Mark went back to last on the first lap. However he was able to come through the pack all the way up to 1st and then slowly extended his lead from there to take the win from HB Racing’s Mike Valentine Jr. in 2nd and TLR’s Seth Rippee in 3rd. In the 2WD main it was Charlie Maiorana with the win from Russ Bryant on the runner-up spot. Mark Sousa struggled with a last minute setup change and ultimately had to settle for 3rd overall.

Source: Xray [teamxray.com]

The post Sousa & Maiorana win at Drumstick race appeared first on Red RC.


Fonte: RED RC.

RC Maker T4’20 GeoCarbon bumper plate with stopper

RC Maker have introduced their new GeoCarbon front bumper plate with stopper for the Xray T4’20 touring car. The plate and stopper feature a stylish, stealthly and innovative design and the parts add extra protection to the front of the car as the support contacts the bulkheads and prevents impacts from snapping the main chassis and are very important. The design integrates the stopper under the main bumper plate, lining up with the bearing mounts on the front bulkheads. In the event of a crash, the force will be transferred through this and keep the chassis in tact, with minimal effect on the bulkheads. The brace recesses over the small bumper posts enabling it to get low enough to align with the bulkhead. When tightening the upper plate, it clamps the whole assembly down tightly. Upon resting, there is a 0.2mm gap between the bulkheads and this support, to prevent any rubbing and tweaking. The bumper plate also features three sets of holes, allowing drivers to adjust the bodyshell forwards and backwards as seen on the standard plates. The integrated stopper does not move, it will be in the same place regardless of the body post position. Due to the design, the plate can also stay in place when removing the front anti-roll bar.

Source: RC Maker [rcmaker.com.au]

The post RC Maker T4’20 GeoCarbon bumper plate with stopper appeared first on Red RC.


Fonte: RED RC.

Dash RC anti-tweak sensor wires

Dash RC have announced the release of their new anti-tweak sensor wires. Available in 50mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, and 300mm length, the high-quality sensors wires are very soft, ensuring easy routing and very little influence on chassis and power pod tweak when used in pan car classes. Additionally the flat design allows to route the wires underneath motors or speed controllers which comes in handy for touring cars and buggies.

Source: Dash RC [dash-rc.com]

The post Dash RC anti-tweak sensor wires appeared first on Red RC.


Fonte: RED RC.

Horak & Hoch win at Winter Race Morava Rd2

The second round of the Winter Race Morava was held last weekend with more than 90 entries for the classes of Hobby, Formula, Touring Stock, Touring Modified, 1/12th Modified and 1/10 GT Pancar. In Touring Stock, Radko Cernohous took the overall TQ, but Simon Horak managed to get past him in the finals for the overall from Radko Cernohous in 2nd and Karel Kratochvil in 3rd, making it an all-Xray top 3.

The Formula attracted 26 entries with some Czech top drivers such as Lukas Hoch, Simon Horak and others in attendance. Ultimately it was Lukas Hoch who took the TQ and win with Simon Horak pushing him to the limit. The track conditions were really hard, low grip changed to lower grip and this was happening all day. Behind Lukas it was Simon for an Xray 1-2 with Serpent’s Tomas Sova coming in 3rd overall.

Source: Xray [teamxray.com]

The post Horak & Hoch win at Winter Race Morava Rd2 appeared first on Red RC.


Fonte: RED RC.

Carisma Scale Adventure ARC-2 Brushed Crawler ESC

Shipping right now from Carisma Scale Adventure is the ARC-2 Brushed Crawler ESC. Ivan and his crew specifically designed the ARC-2 for high-end rock crawling performance. Perhaps the coolest feature on the ARC-2 is its Decent Control. Decent Control acts as a “gravity assist”, allowing you to descend a steep hill in a scale manner. […]
Fonte: Big Squid RC.

Video – Pro-Line 2020 Jeep Gladiator Clear Body

To help promote their all new 2020 Jeep Gladiator Clear Body, the crew at Pro-Line have uploaded a new video. Watch the video below to learn more about P-L’s highly anticipated, and highly scale realistic, Gladiator body. The Gladiator features a great scale look with its 1-piece design, as well as a deep bed to […]
Fonte: Big Squid RC.

Team Associated Water Bottle

New from the Team Associated crew is a sporty Water Bottle. For those long days out on the trail, or down at the track, a cool looking water bottle can come in quite handy. * Made from sturdy aluminum * 26oz capacity * Carabiner included * AE family of logos on one side * Slot […]
Fonte: Big Squid RC.

Project RC Hudy starter box easy start inserts

F.V.S.S. Racing have announced the release of the Project RC easy start platforms for the popular Hudy nitro engine starter box. The inserts are designed to perfectly match with the chassis outlines to make for self-centring ability and thus easier, faster and more convenient engine starting. The platforms are available for the most popular 1/8th and 1/10th on-road kits.

Source: FVSS [fvssshop.it]

The post Project RC Hudy starter box easy start inserts appeared first on Red RC.


Fonte: RED RC.

Monaco RC introduce new carrying bags

Monaco RC have introduced new colours and sizes of their popular high-quality zipped bags. Based on the previous S 16x12x7cm “S” and 22x17x7cm “M” bags two different alternatives were developed per variant and it is now possible to have three versions of the “S” and “M” bags with three heights and three different colours options. The 5cm and 7cm tall S bag allow to store LiPo shorty batteries, motors, a Diff Check or similar equipment while the 9cm variant can be used for chargers etc. As for the 5cm tall 22x17cm M bag it is ideally used for batteries while the 7cm bag takes chargers such as the iCharger 406. The 9cm tall bag allows to store and transport an iCharger 406 including wires and accessories.

Source: Monaco RC [monacorc.com]

The post Monaco RC introduce new carrying bags appeared first on Red RC.


Fonte: RED RC.

Leadfinger Racing A319 A2.1 Tactic body shell

The latest 1/8th buggy to receive Leadfinger Racing’s A2.1 Tactic body shell treatment is the Agama A319. First introduced in mid-2019, the A2.1 Tactic body design has proven itself on the track with a handful of different platforms. Fitment, performance and looks are key in every design, and every platform presents different challenges with each layout. The Agama was no exception. Fuel tank location, and the position of throttle and brake bias linkages needed to be taken into consideration. LFR were looking for a low profile and sleek design to fit the A319 perfectly. The designers were able to combat these differences by stretching the rake of the windshield and adding to the size of the side pod scoops for just the right amount clearance. To keep performance in check, additional down force was added to the rear of the side pods and rear centre of the body. As things started to come together, Leadfinger Racing topped off the cab with a shark fin for stability. To finish off the design the body includes a front scoop for even more tuning ability. As usual the body comes moulded from high-quality polycarbonate material and it includes window masks and a decal sheet.

Source: Leadfinger Racing [leadfingerrc.com]

The post Leadfinger Racing A319 A2.1 Tactic body shell appeared first on Red RC.


Fonte: RED RC.

JConcepts Detox Aqua compound 1/8th buggy tyre

Available soon from JConcepts is the Aqua compound Detox 1/8th buggy tyre. Designed for demanding track conditions, the closely spaced tread creates the ultimate long main event tyre and combined with the compounds such as blue, green, R2, O2O2 and Y2 and now, aqua gives racers an option for just about any temperature requirement. The design revolves around the centre structure which has hefty lugs arranged in a stacked configuration. The lugs have strategically placed cuts and grooves to allow flex in dusty conditions to perform even if the track is deteriorating while a long main is in progress. The outer portion of the tread fits together like building blocks, with shapes placed together that nest well but also work together to flex laterally to provide steadfast side-bite. The tread tapers off cleanly to the outer side-wall giving a smooth transition during hard cornering. The tyre comes including Dirt-Tech closed cell inserts.

Source: JConcepts [jconcepts.net]

The post JConcepts Detox Aqua compound 1/8th buggy tyre appeared first on Red RC.


Fonte: RED RC.